TITAN TANKLESS WATER HEATER N-100 SCR2
THE SCR 2 IS AVAILABLE IN DIFFERENT MODELS. PLEASE SEE OTHER HEATERS ON OUR SITE IF THIS ONE DOES NOT MEET YOUR NECESSITIES.
THIS MODEL IS:
|Model||Max KW at 220V||Volts||Max Amps at 220V|
In Keeping with the reliability and performance of our classic Titan-ATC Electronic Tankless Water Heater, we have developed the newer and more advanced TITAN®-SCR2. The new TITAN®-SCR2 Digital Tankless Water Heater incorporates new space age technology and features a faster and more accurate temperature sampling system, a manual resetable thermostat and a new air/water deferential analyzing system to prevent dry starts, (which is a key problem for other tankless systems.)
By heating water only as it is needed the TITAN®-SCR2 Digital Electronic Tankless Water Heater eliminates the need for bulky water heaters that heat water continuously. This can reduce hot water costs up to 60% over conventional electric water heaters. The TITAN®-SCR2's high efficiency is in part due to its dedicated digital microprocessor that samples input and output temperatures 21 times per second.
This power control system analyzes the data and manages power usage for maximum efficiency and temperature stability. At rest, the TITAN®-SCR2 uses no power at all.
Available in seven models, the TITAN®-SCR2 is ideal for a wide range of application. One TITAN®-SCR2 unit can supply the hot water needs of home and apartments, and in some applications, energy saving can pay back unit cost in less than one year.
Due to its shielded heating elements and copper & brass casing, the TITAN®-SCR2 is ideal in any application where mineral deposits shorten the life of a conventional water heater.
The TITAN®-SCR2 Tankless Water Heater comes with a 10 year warranty on all water-carrying components and all other parts are warrantied for one year. Installation is quick and easy, requiring no venting and the TITAN®-SCR2 compact size allows installation almost anywhere. The TITAN®-SCR2 is without a doubt the Tankless Water Heater for the 21st century.
|Dade Approval||# 97-0627.16|
|NSF/ANSI-372 Certified||ETL Laboratories|
|Dimensions||7" W x 10" H x 2-3/4 D|
|Materials||Brass and Copper Casing|
|Pipe Fitting||1/2" Standard Pipe|
|Pressure Requirements||5 PSI-Min./150 PSI-Max|
|Voltage||220 VAC Std.(208/277 Avail.)|
|Activation||0.4 GPM-on/).3 GPM-off|
|Warranty||10 years on casing leakage, 1 year on components|
|Protection||Digital Temperature Control - Manual Resetable Thermostat|
U.S. Patent.# 8,150,246 & 8,297,525
Note that the KW and Amps are controlled by the setting on the Power Mode.
Check specifications on unit used. Voltage, amperage, breaker and wire may vary depending on local electrical standards. Consult a professional plumber and electrician for guidance.
The electrical specifications are based on 220 volts. It should be noted that higher voltage will increase power, just as lower voltage will have the reverse effect. The (POWER MODE CONTROL) can be adjusted to compensate allowing the user to increase or decrease water temperature. For best performance adjust temperature at MEDIUM FLOW (approximately 1 GPM) this is the average water flow at any faucet with an aerator.
Remember, that any adjustments made on your unit will take seconds to reach point of use. DO NOT OVER HEAT WATER. Water temperature from 105F to 120F is adequate for all practical purposes.
|Model||Max KW at 220V||Volts||Max Amps at 220V|
*N-10 uses 110 volts and will supply only warm water.
House -Apartments - Condominiums - Beauty Salons - Hospitals - Boats - Laboratories - Campers - Offices - Schools - Cottages - Restaurants - Barber Shops - Warehouses - Commercial and Industrial applications or anywhere hot water is needed.
We reserve the right to amend specifications as new technology develops.
Keeping the consumer in mind, Niagara Industries, Inc. has developed a new and more efficient instant water heater, with an improved design and state of the art technology. Niagara has created a new generation of electronic digital tankless water heaters, engineered for performance never before obtainable.
Hot Water Energy Conservation
Heating water accounts for up to 25% of the average household energy. A leak of one drip per second can cost you $1.00 per month, 2 drips $2.00 and so on... Installing aerators in faucets and low flow shower heads can save a significant amount of hot water.
Demand Water Heaters
One way to save on domestic hot water bills is to use (DEMAND TYPE WATER HEATER). A conventional hot water system heats water in a tank to a specified temperature. As heat is lost from the tank, the water is reheated until it reaches the specified temperature again. For most of the day the water in the tank is not used, but it loses heat continually. DEMAND WATER HEATERS Eliminate this problem by heating water only as hot water is drawn.
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.