AlorAir Optional Remote Controller for Digital Humidity, Temperature, Adapt the Humidity Level, for Crawl space basement dehumidifier Sentinel HD55 HDi65 HD90 HDi90 SLGR 1400X, White
The Remote Controller connects to the dehumidifier via a 25' CAT 5 cable. In addition to monitoring surrounding conditions, the remote control contains an integrated sensor that offers multiple options for remote controlling your unit.
The remote control can be used in those 2 ways:
Install the dehumidifier in one room and then duct to another room that has the remote control mounted on the wall. So the unit can adapt to the humidity level.
When your unit is installed in the crawl space, the remote controller can be mounted in your living space or garage. This realizes the long-distance humidity controlling and intelligent monitoring of the unit simultaneously.
（Series 1） （Series 2）
When the back of the controller you receive is shown in figure (Series 2), the controller you receive is Series 2.
You can switch the optional remote control by mode, which is suitable for different ALORAIR dehumidifiers.
Mode 1 is suitable for the following models:
Sentinel HD55 White dehumidifier Sentinel HD55 Blue dehumidifier
Sentinel HD90 dehumidifier Sentinel HDi90 dehumidifier
Sentinel HDi100 dehumidifier Sentinel HDi120 dehumidifier
Sentinel SLGR 1400X dehumidifier
Mode 2 is suitable for the following models:
Sentinel HD55 Gold dehumidifier Sentinel HDi65 dehumidifier
(Mode 1) (Mode 2)
Optional remote controller mode switching guide (Series 2)
Step 1: Pry open the cover
Step 2: Pull out the red jumper cap and connect the pin holder according to your model
For example Sentinel, HDi65, and Sentinel HD55 Gold are connected to the WIFI New header, and other models are connected to the OLD holder.
Step 3: Close the back cover of the controller. If you have any questions, please contact us at email@example.com.
Remote Controller Mode Switching Guide>>>Download PDF
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.