AlorAir 85PPD Large Dehumidifier for commercial with Pump, Capacity up to 180 PPD at Saturation Condition, 5 Years Warranty, cETL Listed, for Large Space, Job Sites
Key Features:
● Moisture Removal Capacity (115V/60Hz): 85 Pints/Day@AHAM (80°F-60%)
180 Pints/Day@saturation (90°F,90%)
● Moisture Removal Capacity (220V/50Hz need to be customized): 85 liters/Day (179 PPD)@ (30°C-80%)
● Coverage Area: Up to 2,300 Sq. Ft.
● COP: 2.44L/kWh (115V/60Hz), 3.0L/kWh (220V/50Hz need to be customized)
● Ideal for removing Damp, Mould, Rot, and Moisture from Museums/Sports Halls, Water Damage Restoration, Vehicle Storage, Basements / Cellars, Storage Areas, Garage, and Basement. Keep Dry and Restrain Bacterial Growth.
● Intelligent Control system: Automatic humidistat control.
Filter: MERV-8
Airflow: 210 CFM, 350 CMH
Sound Pressure Level: <58 dB(A)
Refrigerant: R410A
Draining: Condensate Pump
Defrosting Control System: Auto Defrosting
Functioning Temperature Range: 33.8-104°F
Functioning Humidity Range: 35~90%
Key Design Features:
Auto Defrosting System
Supper COP 2.44 L/Kwh
Rugged Condensate Pump (Developed only for Dehumidifier)
Rare earth alloy Tube Evaporator
Quick Access to Service
Smallest Size
HVAC Remote System
Features:
Compressor Type: Rotary
More Thorough, And More Quicker√
Ducting Options √
Auto Defrosting √
Easy Handling √
Environmental R410A Refrigerant √
Automatic Humidistat Control √
Memory Starting √
Rare Earth Alloy Tube Evaporator√
Continuous Model √
Low Temperature √
Bypass Air sensor √
Stackable
Its stackable design cannot only save flood restorers more space but also make numbers of the machine been transported to the destination for after-flood restoration tasks.
Easy Cord and Hose Storage
Extra Long Cord,19.6ft and 19.6 ft long drain hose makes extension unnecessary, offering great convenience in installation.
Once your job is complete, the power cord and condensate hose stored on the side of the unit helps maximize your storage capacity and simple transport or neat storage.
Easy Operation and Intuitive Control Panel
SET IT AND FORGET IT control automatically starts dehumidification when humidity above target is sensed. After auto or non-auto turns on, the dehumidifier will start or restart with the setting data before the outage, no need to reset the data.
Application:
In the box:
Storm LGR Extreme Water Damage Restoration Dehumidifier ×1
Drainage pipe ×1
MERV-8 filter×1
User Manual ×1
Cleaning Instructions
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.